Home

 About Us

Terms

Links

Contact

    

  6mm Resin Cast Scenics

 
 
   
 


 
 
 
 
 
 
   
Everything ...
     
    Accessories
    Airports
    American Civil War
    Bridges
    Castle Components
    Commercial
    Churches
    Damaged / Ruins
    Fachwerkhauser
    Farming
    Fantasy
    General
    Huts & Cabins
    Housing
    Industry
    Medieval
    Middle East
    Mediterranean
    Military
    Normandy / France
    Napoleonic
    Port & Marine
    Railway
    Roman
    Stalingrad
Vauben
    Viking
    The Old West
    World War I
     
    Perfect Six Range
   
   
 

Ordering & Payment
  You can now order through the shopping cart, or if you prefer you can still place your order by email.

SHIPPING is based on orders shipped within the UK

Customers outside the UK can order and pay online as normal, and the extra shipping cost will be invoiced separately.
 
   
  

 

   
   
   
 
 
6mm Military Buildings and Structures
 
 
 
MIL01 - Airfield - MT Workshop
length 67mm : depth 53mm : height 25mm
  Timber clad effect walls with corrugated or asbestos roofing - front gable has two large sliding doors in closed position, plus an entrance door.

3.50 each
 

 
MIL02 - RAF Control Tower
length 40mm : depth 35mm : height 22mm
  Two floor unit with plain 'render' effect walls, walkway along front with steps at one side.

Flat roof has small hatch in open position with ladder protruding.

3.00 each
 

 
MIL03 - N.F.E. Stores
length 33mm : depth 25mm : height 20mm
  Plain 'render' effect walls with corrugated asbestos roofing. Four windows each side with entrance door on one gable and plain round chimney.

2.60 each
 

 
MIL04 - RAF Generic block
length 48mm : depth 25mm : height 20mm
  Plain 'render' effect walls with corrugated asbestos roofing. Six windows each side with entrance door on one gable and plain round chimney.

2.75 each
 

 
MIL05 - RAF Admin block
length 65mm : depth 29mm : height 20mm
  Render effect walls with corrugated asbestos effect roofing. Single level office at one side with small lean-to on one gable end.

3.00 each
 

 
MIL06 - Airfield Dispersal Huts
length 30mm : depth 28mm : height 15mm
  Pair of timber effect 'Jane' style huts with corrugated asbestos roofing. Small entrance porch and plain round chimney.

3.00 pair
 

 
MIL07 - RAF Canteen block
length 55mm : depth 25mm : height 20mm
  Render effect walls and corrugated asbestos effect roofing. Has small entrance porch and brick chimney on one gable.

2.75 each
 

 
MIL08 - RAF Parachute Store
length 66mm : depth 36mm : height 30mm
  Plain render effect walls with planking effect ventilation/hanging area and corrugated roofing. Double doors on one gable.

3.50 each
 

 
MIL09 - Anti-Blast Bay
length 64mm : depth 50mm : height 10mm
  Small anti-blast bay - paved area with concrete walls and grassed banking.


2.50 each
 

 
MIL10 - Large Concrete Bunker
length 38mm : depth 38mm : height 15mm
  Rough concrete finish bunker, features gun slits on two faces, entrance door on third face and fourth face is plain.

2.75 each
 

 
MIL11 - Hexagonal Pillboxes
length 20mm : depth 20mm : height 13mm
  Set of six concrete pillboxes with firing slits in five walls and small access door.

3.00 set
 

 
MIL12 - Army Barracks Hut
length 65mm : depth 25mm : height 16mm
  Vertical timber effect hut with corrugated or asbestos roofing. Door on one gable end and six windows on each side.

2.75 each
 

 
MIL13a - RAF 'Blister' Aircraft Hangar
length 112mm : depth 70mm : height 25mm
  Brick sided structure with corrugated effect gables, roofing and skylights. Doors are in open position - door opening approx 48mm x 14mm. Door gantry is not included.

4.50 each
 

 
MIL13b - Type S Aircraft Hangar (Admiralty)
length 120mm : depth 80mm : height 28mm
  Corrugated sheet panel effect cladding with 'concertina' type doors in part open position in a 60mm x 15mm opening and side door entrances - roofing has 10 skylights and 3 roof vents.

4.50 each
 

 
MIL13c - Luftwaffe Hangar
width 118mm : depth 76mm : height 29mm
  Timber clad effect walls and plain 'sanded' roofing on this model. Front opening is 77mm x 20mm high and no doors have been fitted, allowing user to finish as required.

4.50 each
 
Although the hangars have been made to suit '6mm scale', actual model dimensions have been reduced, otherwise models would have been 9.75" long, 5.5" wide and over 2" high. Door openings will suit 6mm 'Spitfire/Hurricane' size aircraft and the doorways can usually be cut out with a saw if required.
 

 
MIL14 - Hardened Aircraft Shelter
length 90mm : depth 75mm : height 30mm
  Large HAS. A hollow unit which will accept 6mm aircraft such as Tornado, Harrier etc.

Includes a pair of reinforced doors and side store with large door.

5.00 each
 

 
MIL15 - 3 window Nissen Hut
length 40mm : depth 26mm : height 15mm
  Corrugated Nissen hut with brick gables. Three windows each side and entrance door on one gable - even a fire extinguisher to the left of the door.

2.75 each
 

 
MIL16 - Longues-sur-Mer Battery
length 32mm : depth 35mm : height 22mm
  Rough concrete finish gun battery, loosely based on one at Longues-sur-Mer.

A simple box t
urret with plastic gun barrel is included, which should be good enough to represent the 152mm naval guns used in such bunkers.

3.00 each
 

 
MIL17 - Airfield Photographic Unit
length 62mm : depth 27mm : height 23mm
  Nissen hut with brick tower to one gable, and small entrance porch on one side.


3.00 each
 

 
MIL18 - Romney Hut
length 50mm : depth 25mm : height 15mm
  Generic corrugated Romney hut with brick effect base and gables. Has three small windows on each side, single entrance door on one gable and windows on other.

2.75 each
 

 
MIL19 - Supply Dumps
bases roughly 30mm square
6mm Supply Dump 1 6mm Supply Dump 2
6mm Supply Dump 3 6mm Supply Dump 4
  Set of 4 supply dumps for 6mm, 3 bases consist of assorted crates and oil drums, 1 base consists of assorted crates.

3.00 set of 4
 

 
MIL20 - Atlantic Wall Bunker
length 54mm : depth 35mm : height 25mm
  A plain concrete finish bunker. Front has large gun slit on the lower level and an all-round observation slit on the upper level. The rear has an entrance door at ground level and ladder leading to upper level entrance.

3.00 each
 

 
MIL21 - Fire Control Bunker
length 53mm : depth 34mm : height 18mm
  A rough concrete finish bunker. This one is based on a Fire Control Bunker overlooking the Normandy beaches. Front has two firing & observation slits, rear view has steps leading to entrance opening.

3.00 each
 

 
MIL22 - Fuel Dumps
length 25mm : depth 20mm : height 11mm
  Set of four fuel dumps, 2 each of two kinds cast without bases.

3.00 set
 

 
MIL23 - Sandbag Defences
see details
  Set comprises 2 each of six different sandbag defences including four straights, four curved and four corners all between 22mm and 28mm long and standing roughly 7mm high.

3.00 set
 

 
MIL24 - Luftwaffe Control Building
length 25mm : width 25mm : height 43mm
  A simple brick clad control building with rooftop brick & timber clad watch office. Based on a WW2 German airfield tower.

2.75 each
 

 
MIL25 -  Luftwaffe Control Tower
length 33mm : width 32mm : height 40mm
  A single storey brick clad building with flat roof and a two floor control tower to one side, with small timber boarded watch room on the top.

2.75 each
 

 
MIL26 - Luftwaffe Repair Shop
length 30mm : depth 26mm : height 17mm
  A brick effect clad, small aircraft repair workshop with corrugated effect roofing, short round chimney and large timber double doors.

2.50 each
 

 
MIL27 - Army Medical Tent
length 45mm : depth 26mm : height 16mm
  Canvas effect ridged medical tent. Canvas covered windows on each side.

2.75 each
 

 
MIL28 - Double Medical/Bio-Hazard Tents
length 93mm : depth 28mm : height 16mm
  Canvas effect tent, canvas covered windows on each side and entrance on the ends, the central tunnel allows multiple units to be placed together as shown in the lower picture.

3.00 each
 

 
MIL29 - Atlantic Wall Bunker/Battery
depth 46mm : width 33mm : height 20mm
 
Plain concrete render bunker/gun battery.
 
3.00 each
 

 
MIL30 - Atlantic Wall Gun Battery
depth 37mm : width 31mm : height 25mm
 
Plain concrete render gun battery. Supplied in three pieces and includes simple box turret gun which should represent the 152mm naval guns often used.

3.00 each
 

 
MIL31 - Atlantic Wall Observation Tower
depth 50mm : width 28mm : height 40mm
 
Concrete render finish observation tower in the Atlantic Wall style. 

3.00 each
 

 
MIL32 - Atlantic Wall Bunker with AA pit
depth 40mm : width 37mm : height 22mm
 
Concrete render finish bunker with open AA gun pit on roof suitable for a quad 2cm Flakvierling platform.

3.00 each
 

 
 
 
 

 

Back to top

 

Copyright 2012-18 Leven Miniatures